| | | | |
| Digital Electronic Control OCV 22 / 88 SERIES |
|
|
 |
With the development and proliferation of high level SCADA systems comes the need for automatic control valves to interface with such systems. The OCV Series 22 and 88 digital electronic control valves were specifically designed for this task. While retaining... more |
|
|
| Special Applications Valves OCV 66/66A SERIES |
|
|
|
The Basic Control Valve 66 Globe and 66 Angle is a full port engineered valve. Equipped with two diaphragm chambers, sealed from each other by the diaphragm, and isolated from the valve's main flow passage by an intermediate plate. By pressurizing one... more |
| Altitude Valves OCV 3330 SERIES |
|
|
|
The elevated tank, standpipe or storage reservoir is a common and important element found in many water distribution systems- municipal, fire protection, commercial, military and industrial.
The function of the OCV Series 3330 Altitude Control Valve... more |
| Pressure Reducing Valves OCV 127 SERIES |
|
|
|
The OCV Pressure-Reducing Valve is used in many applications worldwide. The primary function of the 127 series is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either upstream supply... more |
| Pump Control Valves OCV 125 SERIES |
|
|
|
The OCV Series 125 and 126 Pump Control Valves are designed to effectively eliminate the surges associated with the starting and stopping of the pump. Electrically interfaced with the pump motor, the valve opens and closes at an adjustable speed, providing... more |
| Rate of Flow Valves OCV 120 SERIES |
|
|
|
The OCV Series 120 Rate of Flow control valve is designed to control or limit flow to a predetermined rate, regardless of fluctuations in downstream or upstream pressure.
SERIES FEATURES: -
*Self contained, including the differential-sensing orifice... more |
| Surge Anticipation Valves OCV 118 / 108SA SERIES |
|
|
|
The OCV Series118/108SA surge anticipation valves are designed to be installed in a bypass line and provide protection against damaging surges that can occur in pumping systems when a pump is suddenly stopped. Unlike conventional relief valves, which... more |
| Solenoid Control Valves OCV 115 SERIES |
|
|
|
The OCV Series 115 Solenoid Control Valve is designed to provide on/off or open/close control of fluids in response to an electrical signal. The valve consists of the basic OCV model 65 with solenoid-operated pilot. With the appropriate solenoid, the... more |
| OCV 108 SERIES |
|
|
|
In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series of the OCV control valves. Installed in the main flow line, the standard... more |
| OCV 94 SERIES |
|
|
|
The OCV Series 94 check valve is a simple on-off valve that opens to allow forward flow when inlet pressure exceeds outlet and closes tightly to prevent backflow when outlet pressure exceeds inlet pressure.
SERIES FEATURES: -
*Non-surge opening and... more |
| VALVE METER SYSTEM |
|
|
|
The OCV ValveMeter is a self-contained, electronic, flow measuring system. Based upon the variables of valve differential pressure and valve position, the ValveMeter automatically calculates and displays flow rate, eliminating the need for a separate... more |
| 108FC (Globe) / 108FCA (Angle) |
|
|
|
The Model 108FC automatically relieves excess fire pump discharge pressure, to prevent the pressure from exceeding the rating of the fire system components.
SERIES FEATURES: -
Limits maximum pump discharge pressure.
Opens quickly; maintains pressure... more |
| 108FPS PUMP SUCTION CONTROL VALVE |
|
|
|
The Model 108FPS is used to prevent the fire pump from outdrawing the available supply. In so doing, it protects the pump suction supply from damage associated with too low a pressure or backflow and assures adequate supply pressure to the fire system... more |
| Dual Pressure Indicator |
|
|
 |
Instrumentation Process Control.
... more |
| Process Data Acquisition Module |
|
|
|
Instrumentation Process Control.
... more |
| ProcessMulti-Loop Indicator |
|
|
|
Instrumentation Process Control.
... more |
| Temperature Calibrator |
|
|
|
Multi-purpose High Performance Calibration System... more |
| Universal Calibrator |
|
|
|
Multi-purpose High Performance Calibration System... more |
| Untrasonic Level Indicator |
|
|
|
Specification : -
Non-contact style will not affected by material character (such as Pressure, Viscosity, Density)
Measuring range is available with 2M, 5M, 7.5, 10M, 15M, 20M, 50M
Measuring accuracy ±0.25% in liquid (20 C ambient temperature), resolution... more |
| By Pass level Indicator |
|
|
|
Features : -
Metal Material - Titanium, Hastelloy, SU304 / 316, temperature range 140 C, 200 C, 400 C. Pressure rating 25 Bar, 50 Bar, S.G. 0.85~0.45 are available
Plastic material - PP< PVDF, temperature range 80 C and 120 C; pressure 5kg/cm2, Acid... more |
