| | | | |
| 1-Part Epoxy Acrylic Concrete & Garage Floor Paint |
Paint |
|
 |
AUTION: PAINTED SURFACES MAY BECOME SLIPPERY WHEN WET. Adding BEHR® NO. 970 NON-SKID FLOOR FINISH ADDITIVE will help prevent slip. Follow all label instructions. Adding a non-skid additive will reduce the life span of the product therefore, retain any... more |
|
|
| 1,000 ft rated Plastic Floats |
Subsea Equipment |
|
|
Our 14” Plastic Floats provide 45lbs buoyancy and are rated for 1,000ft.
These Safety Orange color floats weight only 9lbs and are made of durable injection molded plastic.
They provide a simple and economic way to meet buoyancy... more |
| 3U201 3U Geo Amplifier, Single Axis, 20/40 Amps RMS CONT/PEAK, 240 VAC |
Amplifier |
|
 |
This accessory is a 3U-format amplifier for brushless motors applications. It can be installed in a UMAC systerm or used as a stand-alone unit. It provides a single axis amplifier circuit with 180 to 360VDC Bus, 20A RMS continous, and 40A RMS peak.... more |
| 3U151 3U Geo Amplifier, Single Axis,15/30 ARMS CONT/PEAK, 240 VAC |
Amplifier |
|
|
This accessory is a 3U-format amplifier for brushless motors applications. It can be installed in a UMAC system or used as a stand-alone unit. It provides a single axis amplifier circuit with 180 to 360VDC Bus, 15A RMS continuous, and 30A RMS peak (two... more |
| 3U081 3U Amplifier, Single Axis 8/12 RMS Amps Cont/Peak, 3 Phase |
Amplifier |
|
|
This is a 3U-format amplifier for brushless motors applications. It can be installed in a UMAC system or used as a stand-alone unit. It provides a single axis amplifier circuit with 180 to 360VDC Bus, 8A RMS continuous, and 12A RMS peak (2 seconds). Includes... more |
| 3U042 3U Amplifier, Two Axes, 4A Cont. 8A Peak RMS, 3 Phase |
Amplifier |
|
|
The 3U042 is a 3U size Geo Direct PWM amplifier designed to drive up to two axis with 4A RMS continuous and 8A RMS peak (2 seconds). These drives are low power amplifiers designed for PWM (pulse width modulated) command signals. These drive systems are... more |
| 18-Bit; 625 kS/s; 16 or 32 Analog Inputs Multifunction Data Acquisition |
Data Converter |
|
|
NIST-traceable calibration certificate and more than 70 signal conditioning options
NI-MCal calibration technology for increased measurement accuracy
Up to 48 digital I/O lines, with 32 hardware-timed up to 10 MHz; two 32-bit, 80 MHz counter... more |
| 900MHz Weather-Proof Cavity Filter Boost SR9 Performance in High Noise Environments |
Wireless Equipment |
|
|
Maximize the potential of your SR9 in high noise environments with this 900MHz Weather-Proof Cavity Filter by Ubiquiti. Includes 18cm LMR-400 cable and mounting brackets.
The 900MHz Outdoor Cavity Filters provide a high-performance outdoor
filtering... more |
| 4 port embedded USB host controller UHC124 |
Semiconductor |
|
|
Oxford Semiconductor’s UHC124 is a four-port, single chip USB host controller that is specifically designed for embedded systems, mobile communications, and consumer products. It is a non-PCI controller that supports full speed(12Mb/s) and low-speed... more |
| 32-bit PC card bridge to serial port OXCB950 |
Semiconductor |
|
|
Combining Oxford Semiconductor’s high performance UART and 32-bit PC Card technology, the OXCB950 is the ideal connectivity solution for products that need to bridge serial devices to 32-bit PC Card interfaces including: Cellular CDMA/GSM/GPRS,... more |
| 2 port embedded USB host controller TDUHC122 |
Semiconductor |
|
|
Oxford Semiconductor’s TDUHC122 is a two-port, single chip USB host controller that is specifically designed for embedded systems, mobile communications, and consumer products. It is a non-PCI controller that supports full speed(12Mb/s) and low-speed... more |
| 16-bit PC card/CF+ bridge to serial port OXCF950 |
Semiconductor |
|
|
Combining Oxford Semiconductor’s high performance UART and 16-bit PC Card/Compact Flash technology, the OXCF950 is the ideal connectivity solution for products that need to bridge serial devices to 16-bit PC Card or Compact Flash interfaces including:... more |
| 16-bit PC card/CF+ bridge to serial and USB host port OXCFU950 |
Semiconductor |
|
|
Combining Oxford Semiconductor’s high performance USB Host Controller, UART and 16-bit PC Card/Compact Flash technology, the OXCFU950 is the ideal connectivity solution for products that need to bridge multiple or high data rate devices to 16-bit... more |
| 18 inch speaker case casting mould |
Side Rear Bar |
|
 |
18 inch speaker case casting mould... more |
| 8-Ton pipe roll |
Pipe and Vessel Handling Equipment |
|
 |
Workpiece Diameter Range: 2inch-42inch
Foot Print: 41˝inch x 36inch x 33˝inch - 45˝inch (height; adjustable in 3inch increments)
Equipment Mass: Driver 375 lbs, Idler 225 lbs
Power Requirements: 110 V, 1-phase, A.C. power input
Operation... more |
| 8,000 lb Welding Pipe Roller Stand |
Pipe and Vessel Handling Equipment |
|
|
Load Capacity: 8,000 lbs with urethane wheels
Workpiece Diameter Range: 2inch - 42inch
Foot Print: 41˝inch x 36inch x 33�inch - 45˝inch (height; adjustable in
3inch increments)
Equipment Mass: 225 lbs
Applications: Ideal for... more |
| 8" bench top positioner Welding Positioners |
Pipe and Vessel Handling Equipment |
|
|
Load Capacity: 200 lbs at chuck face
3-Jaw Chuck: 8 3-Jaw Self Centering Scroll Chuck
Foot Print: 20 x 15 x 11.5 (height to center of chuck)
Equipment Mass: 70 lbs (without chuck)
Power Requirements: 110 V, 1-ph, A.C. power input
... more |
| 75-Ton vessel roll vessel turning rolls |
Pipe and Vessel Handling Equipment |
|
|
Load Capacity (Driver & Idler Set): 75 Tons (150,000 lbs)
Workpiece Diameter Range: 7 ' - 21 '
Foot Print: Idler: 24inch x 126inch x 16.5inch (height to wheel center), Driver:
37inch x 139inch x 16.5inch (height to wheel center)
Equipment... more |
| 48" rotary table & positioner welding turntables |
Pipe and Vessel Handling Equipment |
|
|
Load Capacity: Rotary Table: 20,000 lbs, Positioner: 5400 lbs at chuck face
Turning Torque: 18,500 in-lbs
Chuck Options: Available with either 45inch 3-jaw chuck or 32inch 4-jaw chuck
Foot Print: 48inch x 69inch x 53inch (height; varies... more |
| 48" positioner (tilt adjust) Welding Positioners |
Pipe and Vessel Handling Equipment |
|
|
Load Capacity: Rotary Table: 20,000 lbs, Positioner: 5400 lbs at chuck face
Turning Torque: 18,500 in-lbs
Chuck Options: Available with either 45inch 3-jaw chuck or 32inch 4-jaw chuck
Rotary Table Dimensions: 48inch OD
Foot Print:... more |
