| | | | |
| COMBO MAT |
Composite Parts |
Polymer and Plastic Composites |
 |
This material consists of Chop Strand Mat chemically bonded or stitched together with a variety of different weight woven materials. This combination is used for quick laminate build-up and high strength. It is an excelent way to save time and cut cost... more |
|
|
| COMBINATION MATERIAL |
Composite Parts |
Polymer and Plastic Composites |
|
Combination material consists of two or more different style materials combined together. In most cases the materials are usually a Woven Material or Cloth for high tensile strength along with Chop Strand Mat to reduce labor cost. Most will come in either... more |
| CHOP STRAND MAT |
Composite Parts |
Polymer and Plastic Composites |
|
Chop Strand Mat is a general purpose reinforcement material. It is composed of chopped fiberglass of various lengths randomly dispersed to provide equal distribution in all directions, held together with a chemical binder. The end result is a material... more |
| CARBON FIBRE REINFORCED PLASTIC SHEETS |
Plastics are Polymers |
Polymer and Plastic Composites |
 |
CARBON FIBRE REINFORCED PLASTIC SHEETS
CFR-Epoxy-Sheets
HT carbon fiber or HM carbon fiber possible
standard width 970mm x 1220mm
both sides smooth and glossy minimum thickness... more |
| CONTINUOUS CARBON FIBRES |
Plastics are Polymers |
Polymer and Plastic Composites |
|
CONTINUOUS CARBON FIBRES
TENAX STS
5631 1600 tex 24K
... more |
| Carbon Fibres |
Plastics are Polymers |
Polymer and Plastic Composites |
|
Woven Carbon Fibres (0/90°)
... more |
| Color Solutions |
Plastics are Polymers |
Polymer and Plastic Composites |
|
Ebbtide Polymers offers a complete coloring toolkit for our
customers by addressing the economics, logistics, technology
and convenience of both color concentrates and compounded
engineering... more |
| Cockpit Instruments |
Aircraft |
Electrical and Electronic Components |
 |
Astronautics specializes
in cockpit instruments such as Attitude Director Indicator (ADI) Horizontal
Situation Indicator (HSI), Bearing and Distance Heading Indicator (BDHI), Engine
Performance Indicator (EPI), Angle Of Attack (AOA) Indicator etc... more |
| Chopped Strand Mat |
Plastics are Polymers |
Polymer and Plastic Composites |
|
Approximately 80 lbs. per roll. Compatible with polyester and vinylester resin.
... more |
| CS-30 / CS-40 BEARING MATERIAL |
Composite Parts |
Mechanical Components |
 |
Material Structure
Synthetic fibre-reinforced phenolic composites
CS-30 : MoS2 additions
CS-40 : PTFE additions
By encapsulating Solid lubricant within matrix,CS-30/CS-40 bearing materials are
... more |
| CS-10 / CS-20 BEARING MATERIAL |
Composite Parts |
Mechanical Components |
|
Material Structure
Synthetic fibre-reinforced phenolic composites
CS-10 : no friction modifier
bullet
CS-20 : CS-10 with graphite additions
No electro-chemical corrosion in aqueous solution(CS-10)
... more |
| CM-20 BEARING MATERIAL |
Composite Parts |
Mechanical Components |
|
Material Structure
* Woven aramid fabric-reinforced phenolic composite with graphite additions
* This material has excellent thermal stability and wear resistance
Features
* High wear resistance
*... more |
| CG-72 BEARING MATERIAL |
Composite Parts |
Mechanical Components |
|
Material Structure
Glass composite-backed high strength aramid fibre reinforced phenolic composite
with graphite additions
Bearing grades designed for high load, high impact, slow speed, and vibratory
applications
Resin system... more |
| CN-852 BEARING MATERIAL |
Composite Parts |
Mechanical Components |
|
Material Structure
Bearing layer of fine weave PTFE/synthetic fibre on organic fibre-reinforced
phenolic composite with solid lubricants
Features
* Good friction and wear properties under slow speed oscillating or rotating... more |
| CN-10 / CN-20 BEARING MATERIAL |
Composite Parts |
Mechanical Components |
|
Fine weave cotton fabric-reinforced phenolic composites
Features
Good mechanical strength
Good dimensional stability
Good chemical resistance
Readily machinable
Standard materials of wear rings for hydraulic... more |
| Chip Cap |
PowerCommand Network |
Electrical and Electronic Components |
|
ARC Technologies, Inc. has introduced a new concept for control of high frequency interference from surface mount or plug-in chips. The ARC Chip-Cap absorber products are quickly and conveniently mounted over the noisy chip and are designed to suppress... more |
| Cosmetic flat panels |
Plastics are Polymers |
Polymer and Plastic Composites |
|
Glossy-smooth finish. One layer of 2x2 twill Carbon fiber with fiberglass backing. 24" X 48" panel.... more |
| CADWIND |
Software |
Industrial and Engineering Software |
 |
Process simulation software for filament winding technology:-
Fiber orientation is the decisive factor in the strength of fiber-reinforced
plastics (composites). From the various production methods, filament winding
technology offers a... more |
| Carbon fiber Prepreg |
Plastics are Polymers |
Polymer and Plastic Composites |
|
A modified epoxy prepreg system on 5.9 oz. 2X2 twill Carbon fiber fabric. Cure temperature: 250F for 1 hour or 180f for 4 hours. One year shelf life at 0F or 20 days at 75F. Only sold in 10 yard rolls. Width 50".... more |
| Composite Star |
Software |
Industrial and Engineering Software |
|
Composite Star is an all-embracing composite design software and database for
composite materials and structures. It calculates:
the properties of plies by micromechanics
the properties of laminates by Classical Laminate Theory (CLT)... more |
