| | | | |
| Conical Standoff Insulators |
Insulator |
Polymer and Plastic Composites |
 |
POWERMAT INTERNATIONAL has been operating for the last fifteen years in Indian and International markets and producing wide range of control panel and distribution board components like Stand off Insulators and Busbar Supports in DMC and SMC, MV Epoxy... more |
|
|
| Circuit Emulation |
Multiplexer |
Electrical and Electronic Components |
 |
Zarlink\'s CESoP (Circuit Emulation Services-over-Packet) packet processing
technology transparently \"tunnels\" circuit-based TDM traffic with carrier-grade
quality over many types of packet networks.
Zarlink\'s CESoP technology allows... more |
| Crystalline based solar cells |
System Integrator |
Electrical and Electronic Components |
 |
Innovalight is developing
products for the residential and commercial rooftop market. The initial product
will have a similar look and feel to today’s crystalline based solar cells and
modules but will have a significantly higher power output per... more |
| Case Erectors |
Conveyor |
Material Handling and Packaging Equipment |
 |
The YoungSun case erector is a high speed, fully automatic case
erector with integrated bottom tape sealer. The machine is easy to operate
and adjust for different case sizes by simply turning a handle. Its compact
design allows easy... more |
| Cold Cutting Equipment |
Washer |
Mechanical Components |
 |
Claxton cold cutting equipment is widely used in decommissioning, wellhead
installation and in tieback operations.
Flexibility is always a key requirement for offshore applications and our cold
cutting systems can be adjusted on request... more |
| Cement Top Up Systems |
DIES |
Manufacturing and Process Equipment |
|
The Claxton engineered cement top-up (CTU) system offers the capability of
injecting cement into the annulus between the conductor pipe and the open-hole
section at predefined locations as a back up to the primary cement job. CTU is
used to overcome... more |
| Crane Boom Camera System |
Camera |
Electrical and Electronic Components |
|
The Claxton Crane Boom Camera System is designed to assist Crane operators in
ensuring the safe transfer of loads even in ‘blind’ locations.
The system, built using the same robust technology as our industry-leading
subsea and downhole cameras... more |
| CamScan : LED downhole pan and tilt camera |
Camera |
Electrical and Electronic Components |
|
CamScan is a retrievable subsea / colour camera system designed to be run on
drill pipe conveyed tooling and sand line frames manufactured by Claxton
Engineering.
The tool has an extensive record of successful down-hole operations where... more |
| Co-Ex Twin-Wall Polycarbonate Sheet |
Plastics are Polymers |
Polymer and Plastic Composites |
|
Lightweight: Just 1/8 the weight of glass. Co-Ex Twin-Wall panels are self-supporting and do not require extensive structural support.
Highly Flexible: Co-Ex Twin-Wall panels can be cold formed to many bending radii and can be fabricated on site to... more |
| Custom Fabrication |
Composite Parts |
Mechanical Components |
|
TAP Custom Fabrication (TAP Fab) is a fully equipped high-tech fabrication department. TAP Fab's skilled artisans produce top-quality plastic displays, fixtures, and precision-made parts for industrial customers. The following expert, high-volume services... more |
| Chambers |
Plastics are Polymers |
Polymer and Plastic Composites |
|
RF shielded chambers, shielding, and shielded doors for all applications. Products include tapered and rectangular geometries, anechoic and reverb technologies.... more |
| Cerex Canary:multi-gas analyzer developed for ppm to percent level gas concentrations. |
Analyzer |
Test and Measurement Equipment |
|
The Cerex Canary is a single or multi-gas analyzer developed
for ppm to percent level gas concentrations. The Canary is packaged in either a
NEMA rated industrial case or a weather resistant case with integrated display,
wireless communication... more |
| Cerex HOUND:multi-gas analyzer |
Analyzer |
Electrical and Electronic Components |
|
The Cerex HOUND series are portable multi-gas analyzers
developed to detect part per billion (ppb) to percent level concentrations of
multiple gases within a mixture. The HOUND produces laboratory quality results
in real-time using ultraviolet... more |
| Cerex AirSentry: the recognized choice in open-path FTIR |
Analyzer |
Laboratory Equipment and Scientific Instruments |
|
The Cerex AirSentry is the recognized choice in open-path
FTIR and the most reliable for monitoring industrial facilities, accidental
releases, and hazardous waste site emissions. The system monitors from 5 to
1,000 meters and eliminates... more |
| Cerex UV Sentry:a two-part open-path air-monitoring system |
Analyzer |
Laboratory Equipment and Scientific Instruments |
|
The Cerex UV Sentry is a two-part, open-path air-monitoring
system that uses ultraviolet light to analyze the air for hazardous pollution
and airborne toxins. Easy to use and portable, the UV Sentry can continuously
monitor path-lengths... more |
| Cerex Sentry-MS:air-monitoring system |
Analyzer |
Test and Measurement Equipment |
|
The Cerex Sentry-MS is a
mono-static, open-path air-monitoring system that uses ultraviolet light to
analyze the air for hazardous pollution and airborne toxins. Easy to use and
portable, the Sentry-MS can continuously monitor one way path-lengths... more |
| Cerex UV 3000:a multi-gas analyzer |
Analyzer |
Test and Measurement Equipment |
|
The Cerex UV 3000 is a multi-gas
analyzer featuring a fiber coupled deuterium or xenon UV source for use with a
range of fiber coupled cells or external telescopes. Combined with a
... more |
| CAE Service |
Automotive |
Industrial and Engineering Software |
|
1. CAE Automotive markets :
(a) FEA meshing Crash:
Full Vehicle Component level Crash simulation
Occupant Safely Analysis
Head /Knee Impact Studies
Optimization
(b)... more |
| Cameras-Intercoms |
Control systems integration |
Electrical and Electronic Components |
|
ETS-Lindgren's Model 4330 CCTV is ideal for monitoring or witnessing tests
conducted in anechoic or reverb chambers, small test cells, and chambers where
EMI field strengths are present. The camera is mounted in a shielded enclosure
on a bulkhead... more |
| Composites Engineering |
Composite Parts |
Mechanical Components |
 |
Engineering of light weight composite structures requires
specialised skills and tools. Lavender has extensive experience in the
aeronautical, automotive, marine and industrial sectors. Our design office
utilises the latest in 3D CAD and finite... more |
