Trade.Information

Product Name: BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster Topcoat No. 775

Product Description

This 100% Acrylic, water-based, clear protective finish increases the durability and sheen of Behr Venetian Plaster. 


Available In 
- BEHR PREMIUM PLUS WITH STYLE® Venetian Plaster Topcoat No. 775 - MSDS 

WHERE TO USE 
As a clear protective topcoat to increase the durability of BEHR® VENETIAN PLASTER in high moisture and high traffic areas. Dries to a Satin sheen. 

PREPARATION* 
Apply after the VENETIAN PLASTER finish has completely dried, approximately 24 hours. Do not burnish the surface before or after the application of the VENETIAN PLASTER TOPCOAT. 

APPLICATION 
Refer to the BEHR Faux Textures Colors & Techniques Guide and www.behr.com for additional instructions on application. DO NOT THIN. Stir occasionally. Use product when the surface and air temperatures are between 50-90°F (10-32°C). Apply using a straight-edged, flexible steel trowel or wall scraper. Hold trowel at an angle, spreading a very thin, even coat of the product across the surface. Remove any excess topcoat with a damp rag or sponge. The topcoat will dry to a Satin sheen and darken the tone and/or color of the finish. Typical spread rate is 200 sq. ft. (19 sq. meter) per quart. 

DRY TIME 
Dries in 24 hours at 75°F (23°C) and 50% humidity. Additional dry time is needed in cooler temperatures and higher humidity. 
After 2 weeks, the surface may be cleaned with a mild, non-abrasive liquid detergent.

CLEAN UP & DISPOSAL 
Use soap and water.
Properly dispose of all soiled rags and protect unused product from freezing.
To recycle or properly dispose of paint in your community, call 1-800-CLEANUP or visit www.Earth911.org.
Refer to the BEHR Faux Textures Colors & Techniques Guide for additional tips or visit us at www.behr.com. 

LIMITED WARRANTY 
Behr Process Corporation warrants that this product meets Behr's manufacturing specifications. If this product does not meet these specifications, Behr will, at its option and upon proof of purchase, either furnish an equivalent amount of new product to you or refund the purchase price of this product. Behr will not be responsible for (1) labor or the cost of labor for removal or application of any product; or (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 

* WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. 

WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. 
WARNING! IRRITANT! HARMFUL IF SWALLOWED. CONTAINS: ETHYLENE GLYCOL. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. 

USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. 

CAUTION: KEEP OUT OF REACH OF CHILDREN - DO NOT TAKE INTERNALLY.

Company Details

Being a leader in our industry requires one resource above all others - great people. To successfully respond to the changing needs of our customers and strategies of our competitors, BEHR has identified, developed, and retained quality people who... more