| | | | |
| Cold Cutting Equipment |
Washer |
Mechanical Components |
 |
Claxton cold cutting equipment is widely used in decommissioning, wellhead
installation and in tieback operations.
Flexibility is always a key requirement for offshore applications and our cold
cutting systems can be adjusted on request... more |
|
|
| Tools and Misc |
Composite Parts |
Mechanical Components |
 |
NAU80 table top cutting surface 1/4"x3'x8'
NAU80 table top cutting surface 1/4"x3'x4'
NAU80 table top cutting surface 1/4"x2'x5' ... more |
| Tubes |
Tube |
Polymer and Plastic Composites |
|
Unlike conventional filament winding, ACP's tubes are manufactured by using a
unique production process whereby longitudinal fibers are oriented to provide
excellent tensile, compressive, and flexural properties. Circumferential
windings between... more |
| WOVEN FABRICS |
Plastics are Polymers |
Polymer and Plastic Composites |
|
S Glass uses a unique chemical fommulation which results in a stronger, tougher, and stiffer fabric than E Glass. S Glass is approximately 25% stronger than E Glass. One ply of S Glass can replace several plys of E Glass resulting in a considerably lighter... more |
| Spyderfoam |
Plastics are Polymers |
Polymer and Plastic Composites |
|
New product developed expressly for composite construction. Spyder foam has two times the compressional strength of blue foam and greater shear strength. Spyder foam's unique design incorporates a fine cell structure that is alinged perpendicular to the... more |
| Mats |
Plastics are Polymers |
Polymer and Plastic Composites |
|
ACP's carbon mat is an advanced nonwoven carbon fiber mat incorporating 100% carbon fibers (approx. 1" in length) bonded together in a random fiber matrix. Carbon mat is compatible with all epoxy and polyester resin systems. It is especially useful for... more |
| Laminated Panels |
Plastics are Polymers |
Polymer and Plastic Composites |
|
ACP's carbon/balsa panels consist of two plys of unidirectional carbon fiber skins, layed up 0-90 degrees and bonded to an end grain balsa core. This lay-up offers a panel which is lighter than, but with the same stiffness and strength as Lite-Ply or... more |
| Fiberglass Sheets |
Plastics are Polymers |
Polymer and Plastic Composites |
|
Glass-Ply is a cured epoxy/fiberglass sheet which is available in four thicknesses: .005", .010", .015", and .020". The .005" and .010" sheet can be used to sheet foam wings on slope soarers or gliders. The .015" and .020" sheets can be used for hatches... more |
| Butterfly valves |
Valve |
Mechanical Components |
|
Resiliant Seated Valves
RAM Universal offer a range of resilient sealed butterfly valves for chemical,
food, sanitary and water applications. the rugged and reliable design of the
valves offers complete isolation of product media from... more |
| Display Modules |
Composite Parts |
Electrical and Electronic Components |
 |
Prelonic combined displays, batteries, push buttons and conductors to stand- alone display modules - fully printed and integrated.
These display modules enable greeting cards with interactive visual elements and gaming cards with visual effects,... more |
| TRIDON |
|
|
 |
Hose clamp in the home improvement retailer raised against abruptly応径too big, but was in trouble, 2007 of Aug. 14, a white 66 OFUMI DAIHATSU NAKED FAN receive from her. Φ35 silicone the outside diameter of the... more |
| X-33 Shuttle Replacement |
Aircraft |
|
|
July 2, 1996: Vice President Albert Gore announced today that
the Lockheed Martin Skunk Works has been selected to build and fly the
X-33
Advanced Technology Demonstrator... more |
| H8 door hinges |
Door Hinges |
|
|
ALM supplies a wide range of door hinges to suit all your cubicle requirements ranging from butt hinges through to wrap around hinges. Most hinges incorporate easily adjustable cams, allowing the door to fall open/closed and offer a choice of through... more |
| H1 door hinges |
Door Hinges |
|
|
ALM supplies a wide range of door hinges to suit all your cubicle requirements ranging from butt hinges through to wrap around hinges. Most hinges incorporate easily adjustable cams, allowing the door to fall open/closed and offer a choice of through... more |
| Miller Electric 903035 Auto Arc Quick Cut 4500 Plasma Cutter, 115V-230V |
Welding Equipment |
|
|
The Miller Electric 903035 is a Auto Arc Quick Cut 4500 Plasma Cutter. The dual input voltage located in back of unit allows either 115V or 230V AC input power and provides patented protection in case of incorrect switch position. Unit provides full cutting... more |
| Miller Electric 707115 Electronic Auto-Darkening Welding Helmet with 2.4" x 3.8" Lens |
Welding Equipment |
|
|
The Miller Electric 707115 is an Electronic Auto-Darkening Welding Helmet with 2.4 x 3.8 Lens. The lightweight full-face auto-darkening helmet changes from light to dark in a fraction of a second. It switches from a shade #3 to #10 the moment the arc... more |
| Hobart Welders Weld-It 770432 Auto Darkening Flip Front Welding Helmet - Black |
Welding Equipment |
|
|
-Lens darkening (#10) reaction time is 1/3,600 sec
-2 independent arc sensors provide continuous arc-sensing capability
-Solar powered lens users non-replaceable lithium battery
-Ratchet-style headgear features Coolmax® odor-absorbing sweatband
... more |
| Hobart Welders 770445 XTV Series Variable Shade - Blaze Orange |
Welding Equipment |
|
|
Lens darkening (#9–12) reaction time is 1/12,000 sec.
-Auto-darkening shade, lens sensitivity and delay controls are internally adjusted.
-2 independent arc sensors provide continuous arc-sensing capability
-Battery powered with solar-assist... more |
| Hobart Welders 770424 XTV Series Variable Shade - Black Auto Dark Helmet |
Welding Equipment |
|
|
-Lens darkening (#9–12) reaction time is 1/12,000 sec.
-Auto-darkening shade, lens sensitivity and delay controls are internally adjusted.
-2 independent arc sensors provide continuous arc-sensing capability
-Battery powered with... more |
| Hobart Welders 500493 AirForce 625 Plasma Cutter |
Welding Equipment |
|
|
The Airforce 625 plasma cutting and gouging system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240 V generator power outlet of... more |
