| | | | |
| Custom Welding positioners |
Pipe and Vessel Handling Equipment |
|
 |
At LJ Welding & Machine, we have been producing quality welding positioners and turning rolls for over 15 years. In response to the needs of our customers, our custom welding and fabrication services have been evolving with technological and industry... more |
|
|
| MORI SEIKI LATHES, CNC/SLANT BED |
|
|
 |
Following is a quotation on a Mori Seiki SL-150SMC CNC Turning Center
which may be of interest to your company.
Mori Seiki SL-150SMC CNC Turning Center
Model #SL-150SMC
Serial #1179
Age 1999
Installed 1/2000
Cutting hours 835
Swing over bed 26... more |
| ACCESSORIES FOR MIXING AND APPLICATION |
|
|
|
Calibrated Resin Pump Set
Contains both the 8cc and 4cc pumps. For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
Newfound Woodwork\'s Video
\"Applying epoxy and fiberglass\" (Sheathing a cedar strip canoe)
Sticky Stuff... more |
| SLOW HARDENER |
|
|
|
MAS Slow Hardener is a highly-regarded epoxy resin hardener that\'s phenol-free with modified amines. When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application... more |
| MAS MEDIUM HARDENER |
|
|
|
MAS Medium Hardener is a polyamine blend intended for moderate reactivity and resistance to amine blushing. Moderate pot life, gel, and thin film set times provide advantages when filleting and fairing. MAS Epoxy/Medium mixed with thickeners, gels and... more |
| MAS NON-BLUSHING |
|
|
|
The hardener for quick repairs and accelerated cure times. May be mixed with other MAS hardeners for custom cure times, and now it\'s non-blushing!
The low viscosity of Fast Hardener allows for quick wet-out of the heavy reinforcing fabrics often... more |
| MAS F.L.A.G. |
|
|
|
The premiere resin for:
Filleting
Laminating
Gluing
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs.
F.L.A.G. Resin... more |
| RAPID CURE EPOXY KITS |
|
|
|
Our ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!!
It\'s great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You\'ll have 1-2 minutes to use it, and 5-10 minutes to set it... more |
| FILLERS AND ADDITIVES |
|
|
|
Fumed Colloidal Silica (formerly known as CAB-0-SIL)
For use when an extremely hard solid with high density is needed, i.e. structural bonding, filling and filleting
Milled Fibers (1/32\" milled fiberglass)
For use when epoxy must fill a void and provide... more |
| LOW VISCOSITY RESIN |
|
|
|
MAS Low-Vis Resin offers some near-perfect features: EASY wet-out of your material, NO VOC\'s for a better environment, and NO BLUSH when you\'re done! These are the kind of advantages MAS has offered since we began and others are only now copying - at... more |
| FABRICATING, CUTTING AND SAWING |
|
|
 |
Punches Presses and Brakes Sheet Metal Formers Benders and Tubing Tools Tube and Pipe Cutters Gasket Cutters Paper Trimmers Glass and Tile Cutters Drum Deheaders Bolt and Wire Cutters Cable Cutters Snips Shears and Scissors Knives... more |
| Single Anvil Diecutter |
|
|
|
Start with the single anvil module Add unwinds, rewinds, web guidance, sheeter/stacker/conveyor and more. Tell us what you need, PACE can make it with your specifications in mind.
... more |
| Stand-Alone Single Anvil Diecutter |
|
|
|
The Stand-Alone Diecutter was designed in response to requests and suggestions from our customers and prospects. They told us they keep running into applications where they need a single stage diecutting unit. They wanted one that can be moved into... more |
| PACE Model DX diecutter |
|
|
|
The PACE Model DX is the perfect fit
.right between the PLYMATE and the PACER.
In fact, the model DX is the perfect middle-sized fabricator.
All the machines features, including the price, will give you the diecutter you have
been looking... more |
| PLYMATE |
|
|
|
This small laminating and diecutting machine is capable of precision in-line rotary fabricating of webs. It has three anvil positions to accommodate webs up to seven inches wide. With a footprint of 44 wide by 44 deep and a self-contained work table... more |
| CLIPPER |
|
|
|
As a dedicated blank label press, the ruggedly built Clipper combines unmatched speed (950FPM), precision operation, low maintenance, and an operator friendly configuration. Finished rolls can be completed on press. Maximum web widths are 10, 16 or... more |
| PACER a versatile, rugged machine for rotary fabrication |
|
|
|
If you have to combine various fabricating operations, shift from one project to another with easy set-up, while maximizing your output by minimizing downtime, then this is the machine for you!
Electronic, automotive and medical parts manufacturers are... more |
